Originally based in Brooks, Alberta, in 1992 the Company moved to Red Deer, Alberta, to be closer to its primary markets in the deep high pressure gas exploration, production and transportation sectors.  The Company produces a wide range of products (see Equipment & Products) from its 16,000 sq.ft. manufacturing plant and 4 acres of laydown area.
Welder/Operators are certified for carbon steel and stainless steel to ASME Section IX. The firm is certified by the Alberta Boiler Safety Association and ASME National Board.
           
FACILITY, EQUIPMENT & CAPABILITY SUMMARY            

Main Building Assembly Area and Lifting data:

• Two (2) Tonne Overhead cranes - l8 foot floor to crane hook height 
• 480V 3 Phase Electric
  

Building Access Door Sizes:

• Large door at back - 24'W x 24'H
• Second door at back- 16'W x 18'H
• Small door at front - 12' W x 16'H

Adjacent All Weather Tent Enclosure Size:

• Approximate 4000 Sq. Ft.

Sizes and weights that can be handled:

• Plate thickness & weld procedures for carbon steel up to 8" thick and diameter 14’.
  
• Length we have fabricated: 415' X 42" OD Flare Stack
  
• Largest Skid Pkg Weight: 228,000 lbs.
  
• Length and number of level beds for horizontal tower construction: no limit

Shipping facilities and range:

• Trucking Facilities - sub-contractors

Welding Equipment

• Welding Machines: l8 AC 3 DC
  
• Welding Positioners: 3 120 Volt 220 Volt
  
• Shell Turning Rolls: 3 pairs 120 Volt 220 Volt
  
• Automatic Welding: 2 Sub Arc

Types of welding equipment employed:

• Wire Feed (Mig, Fluxcore,Metal Core)
  
• SMAW
  
• TIG

Qualified Welding Procedures – ASME Sec IX:

• Automatic SAW
  
• Manual SMAW GTAW
  
• Semi-Automatic GMAW FCAW

Machine Tools:

• Drill Presses Max 2" diameter
  
• Punches Iron Worker l" diameter carbon steel

Other machines:

• Bevellers: 2" dia. through 36" diameter
  
• Radiograph
  
• Two Cut Off Saws
  
• 25,000 lb. Fork Lift
  
• Breathing Air Compressor
  
• Bob Cat

Heat Treating Furnace Sub Contracted to Integrated Metallurgical, Calgary, Alberta:

• Inside Dimensions Furnace # I: 12' X 12' X 40'
  
• Furnace #2: l5' X 15' X 80'
  
• Furnace #3: 5 ' X 5’ X 13'
  
• Automatic Control or Manual Automatic
  
• Number of Thermocouples: capabilities for 12 in each oven
  
• Number of Readings Recorded: 12
  
• Method of Loading: car bottom – O/H bridge crane (130,000lb. total)
  
• Maximum Temperature #l (790 deg C), #2 and #3 (630 deg C)
  
• Years experience in stress relieving code vessels: 35 years
  
• Years furnace has been in operation: 21 years

Testing Capabilities:

• Cryogenic Tempering
  
• Non-Destructive Testing Equipment
  
• Physical Testing Equipment
  
• Chemical Testing Equipment
  
• Hydrostatic Pressure Testing 10,000psi and normal holding time I hour
  
• Air leak test on threaded pipe and instr. tubing 100psi
  
• Ultrasonic  - sub-contract